← Back to Industry Guide Rates

Reference only

Industry guide labour rate

Suggested labour-only industry guide rate. Materials, transportation, site conditions, location and additional work may affect the provider's final quotation.

These labour-only industry guide rates are reference information. Project conditions, location and other applicable factors may result in additional charges. A provider's final quotation may therefore differ from these guide rates.

This is not a provider quotation, not a fixed retail price, and not a booking or payment amount.

Work item Industry guide labour rate Unit
Apply Bondcrete to concrete surfaces J$163.00 m2
Build stone retaining wall in mortar J$22,600.00 m3
Chase rough wall for ½–1-inch plumbing/electrical pipe J$229.00 metre
Chase rough wall for 1¼–2-inch plumbing/electrical pipe J$311.00 metre
Chase rough wall for 3–4-inch plumbing/electrical pipe J$406.00 metre
Cut-stone facing and pointed joints on 4-inch wall J$21,708.00 m2
Cut-stone facing and pointed joints on 6-inch backing J$22,591.00 m2
Cut-stone facing and pointed joints, extra over wall J$16,640.00 m2
Fair-face ceilings J$635.00 m2
Fair-face walls J$498.00 m2
Form and finish small plumbing/electrical pipe opening through wall J$70.00 each
Form weep hole in thick stone wall J$2,449.00 each
Form weep hole in thin stone wall J$1,438.00 each
Hack concrete surfaces for rendering J$544.00 m2
Labour to pour and settle ready-mix concrete J$3,250.00 m3
Lay 12 × 12-inch breather blocks and rake joints J$3,136.00 m2
Lay 4-inch blocks with alternate filled pockets, ground to first floor J$1,333.00 m2
Lay 4-inch blocks with alternate filled pockets, upper floors J$1,481.00 m2
Lay 4-inch blocks, filled pockets, ground to first floor J$1,523.00 m2
Lay 4-inch blocks, filled pockets, upper floors J$1,666.00 m2
Lay 6 × 6-inch breather blocks and rake joints J$5,331.00 m2
Lay 6-inch blocks with alternate filled pockets, ground to first floor J$1,441.00 m2
Lay 6-inch blocks with alternate filled pockets, upper floors J$1,666.00 m2
Lay 6-inch blocks, filled pockets, ground to first floor J$1,666.00 m2
Lay 6-inch blocks, filled pockets, upper floors J$1,904.00 m2
Lay 6-inch-high concrete louvres and rake joints J$321.00 each
Lay 8-inch blocks with alternate filled pockets, ground to first floor J$1,616.00 m2
Lay 8-inch blocks with alternate filled pockets, upper floors J$1,838.00 m2
Lay 8-inch blocks, filled pockets, ground to first floor J$1,904.00 m2
Lay 8-inch blocks, filled pockets, upper-floor work J$2,221.00 m2
Lay 9 × 9-inch breather blocks and rake joints J$3,554.00 m2
Lay bricks/pavers and point and clean joints J$7,067.00 m2
Lay bricks/pavers as edging and point and clean joints J$813.00 metre
Lay haunch and point kerbs J$1,009.00 metre
Lay paving slab on sand without pointing J$275.00 each
One-coat render to walls and ceilings J$808.00 m2
Pebble-dash finish to walls J$833.00 m2
Rod-off and broom-finish floor slab J$702.00 m2
Rod-off and steel-float floor slab manually J$1,045.00 m2
Rod-off and steel-float floor slab mechanically J$498.00 m2
Rod-off floor slab to receive tiles or screed J$205.00 m2
Rough-cast finish to ceilings J$740.00 m2
Rough-cast finish to general walls J$684.00 m2
Rough-cast Tyrolean finish to walls J$833.00 m2
Set screeds to floors/roofs using mortar J$227.00 m2
Steel-float finish to walls J$1,403.00 m2
Trowel-finished coloured surface to walls, floors and driveways J$808.00 m2
Tyrolean finish to walls J$1,045.00 m2

← Back to all Industry Guide Rates