← Back to Industry Guide Rates
Reference only
Industry guide labour rate
Suggested labour-only industry guide rate. Materials, transportation, site conditions, location and additional work may affect the provider's final quotation.
These labour-only industry guide rates are reference information. Project conditions, location and other applicable factors may result in additional charges. A provider's final quotation may therefore differ from these guide rates.
This is not a provider quotation, not a fixed retail price, and not a booking or payment amount.
| Work item | Industry guide labour rate | Unit |
|---|---|---|
| 1 × 4-inch tongue-and-groove ceiling below rafters/joists | J$1,685.00 | m2 |
| 1 × 4-inch tongue-and-groove sarking/flooring over rafters or joists | J$1,512.00 | m2 |
| 1 × 6-inch fascia | J$386.00 | metre |
| 1 × 6-inch tongue-and-groove ceiling below rafters/joists | J$1,365.00 | m2 |
| 1 × 6-inch tongue-and-groove sarking/flooring over rafters or joists | J$1,238.00 | m2 |
| 1 × 8-inch tongue-and-groove ceiling below rafters/joists | J$1,210.00 | m2 |
| 1 × 8-inch tongue-and-groove sarking/flooring over rafters or joists | J$1,065.00 | m2 |
| 2 × 10-inch rafter or beam including ends | J$788.00 | metre |
| 2 × 2-inch framing for gypsum/plywood partition | J$290.00 | metre |
| 2 × 4-inch framing for gypsum/plywood partition | J$461.00 | metre |
| 2 × 4-inch rafter or beam including cutting ends | J$472.00 | metre |
| 2 × 6-inch rafter or beam including cutting ends | J$567.00 | metre |
| 2 × 8-inch rafter or beam including cutting ends | J$724.00 | metre |
| Aluminium capping to roof edges | J$477.00 | metre |
| Aluminium flashing into reglet | J$624.00 | metre |
| Aluminium gutter fitted in metal brackets | J$1,193.00 | metre |
| Aluminium sheeting to roof or wall | J$1,109.00 | m2 |
| Aluminium/zinc lining to roof valley or gutter | J$978.00 | metre |
| Clay tiles to roof or wall | J$1,331.00 | m2 |
| Fibreglass shingles to roof or wall | J$1,775.00 | m2 |
| Fit hurricane strap | J$165.00 | each |
| Formwork to beams, erect and strip | J$2,218.00 | m2 |
| Formwork to belts and stiffeners, erect and strip | J$2,080.00 | m2 |
| Formwork to columns, erect and strip | J$2,218.00 | m2 |
| Formwork to suspended floor slabs, erect and strip | J$2,218.00 | m2 |
| Formwork to walls, erect and strip | J$1,972.00 | m2 |
| Install ½–⅝-inch gypsum sheeting to ceilings | J$1,024.00 | m2 |
| Install ½–⅝-inch gypsum sheeting to walls | J$887.00 | m2 |
| Install ⅝-inch concrete board to walls | J$993.00 | m2 |
| Metal-stud frame for gypsum ceiling | J$477.00 | metre |
| Metal-stud frame for gypsum walls at 24-inch centres | J$1,331.00 | m2 |
| Plywood sarking to roof, ½–¾ inch | J$918.00 | m2 |
| Tape and plaster ceilings | J$1,311.00 | m2 |
| Tape and plaster walls | J$1,210.00 | m2 |
| Wooden shingles to roof or wall | J$2,218.00 | m2 |
| Zinc sheeting to roof or wall | J$807.00 | m2 |